Can I add leveling jacks to my travel trailer?
Leveling jacks are optional equipment for some travel trailers and 5th wheel trailers, and must be added by the dealer when the trailer is ordered. Note: If you purchase an RV without leveling jacks, there are aftermarket leveling systems that can be installed on the RV.
How do I Reset my Lippert auto leveling system?
Once you are satisfied with your leveling (I leveled my coach 1 degree high in the front so A/C condensation would drain at the rear of the coach) you turn off your leveling system and press front 5 times and then press rear 5 times your system should come on and indicate that calibration has been reset.
What’s the best way to level a Lippert?
Put the controller in manual mode and get the unit level that way first. As close to perfect as you can with a carpenters level in the center of the rig. Level front to back and side to side. Triple check it as when your done this is your new zero point.
How does Ground Control 3.0 work on Lippert?
On Ground Control 3.0, you manually level the trailer front to back , side to side. Then, when all is leveled, turn off control panel and push 5 times up, and 5 times down arrows. You will see a screen come up stating Zero Point Configuration successful. I’m on the road, so double check my instructions online wt Lippert website.
How to reset zero point on Lippert ground?
Use the up key pad to cycle thru until you teach manual mode and press enter. From here you can extend or lower as needed Once you have it level, then follow the steps Erik posted to set you zero point. Note: on some Lippert systems, you have to press the Front and Rear buttons 10 times versus 5.
How does Lippert Ground Control 3.0 automatic leveling system work?
With the Ground Control® 3.0 Automatic Electric Leveling System by Lippert™, that dream can come true. A push of a button is all it takes for this system to level your RV in just a fraction of the time it would take you to do it manually.
What’s the best way to level a Lippert 3.0?
For the LCI 3.0 Electric Leveling system like is used on the Solitude S Class, if you have to manually operate the motor/gear housing use a 3/8 drive extension and ratchet. Any tip or trick to manually extend the center jacks?
What do you need to know about Lippert components?
Lippert Components has developed a range of leveling and stabilization solutions to enhance every RV set up. We’ve made it faster, easier and simpler to get your RV up and running at the campsite and to maintain a stable and safe foundation for the RV lifestyle.
Where can I find the Master Repair Manual for Lippert?
Also, you can search the internet for the Lippert Master Repair manual and in it you will find the re-calibration codes for the various systems, along with a massive amount of information on all the other Lippert components in your coach (highly recommended resource). Good luck and let us know how this turns out.
