Why does my Forest River slideout not work?
The slides on some rigs (like Forest River) will not operate with the ignition or engine running. Safety issue. Other rigs are different. A friend in our chapter had this same problem that he fought for several years. His slideout operated with an electric motor driving 2 parallel rack and pinion sets from a single shaft.
Are there any recalls on the Forest River Georgetown?
Problem: Forest River, Inc. (Forest River) is recalling certain 2019-2020 Georgetown GTA34H5F motorhomes. The rubber liquid propane (LP) gas line may have been improperly routed against the metal burner chamber of the refrigerator. Recall Details
What kind of motor does a slideout use?
His slideout operated with an electric motor driving 2 parallel rack and pinion sets from a single shaft. I don’t know a lot of the details, but it turned out that at the end of the stroke, the slide out dropped so that one of the rack and pinion sets changed center distance enough that the gear teeth disengaged.
Is there an electrical problem with the slide out?
Finding an apparent electrical button, the control panel was removed and the wires for the stuck slide were placed on another slide “in/out” button. Again, there was no power to the stuck slide when the “In” was pushed. The two young mobile repair techs were now perplexed and did not have the skill to trouble-shoot the electrical issue.
Problem: Forest River, Inc. (Forest River) is recalling certain 2019-2020 Georgetown GTA34H5F motorhomes. The rubber liquid propane (LP) gas line may have been improperly routed against the metal burner chamber of the refrigerator. Recall Details
The slides on some rigs (like Forest River) will not operate with the ignition or engine running. Safety issue. Other rigs are different. A friend in our chapter had this same problem that he fought for several years. His slideout operated with an electric motor driving 2 parallel rack and pinion sets from a single shaft.
His slideout operated with an electric motor driving 2 parallel rack and pinion sets from a single shaft. I don’t know a lot of the details, but it turned out that at the end of the stroke, the slide out dropped so that one of the rack and pinion sets changed center distance enough that the gear teeth disengaged.
Can you move slides with the engine running?
Then, always have the coach level and the engine running before moving slides. The slides on some rigs (like Forest River) will not operate with the ignition or engine running. Safety issue. Other rigs are different. A friend in our chapter had this same problem that he fought for several years.
What’s the best way to retract slideouts?
Every seminar I have attended says to always operate the slides at road level, which means to put them out before leveling the coach and bring them in after raising the jacks. This sets the coach “true” so the slides are not “torqued”, which can cause binding and damage.
What causes a retracting slideout to skew and bind?
The retracting load would then fall on only one set of gears thus causing the slideout to skew and bind. The problem was solved by adding shims to prevent the change in center distance. If you have the same type of system, you might check the gear tooth engagements with the slideout fully extended. Good luck!
Where are the rods that drive the slide out?
The opening is just to the left and below the yellow wire screw caps (first photo with old motor) Square rods that drive the slide bars are attached on both sides of the motor gear box (second photo with new motor). The slide-out that was stuck open is also shown below.
Every seminar I have attended says to always operate the slides at road level, which means to put them out before leveling the coach and bring them in after raising the jacks. This sets the coach “true” so the slides are not “torqued”, which can cause binding and damage.
The retracting load would then fall on only one set of gears thus causing the slideout to skew and bind. The problem was solved by adding shims to prevent the change in center distance. If you have the same type of system, you might check the gear tooth engagements with the slideout fully extended. Good luck!
The opening is just to the left and below the yellow wire screw caps (first photo with old motor) Square rods that drive the slide bars are attached on both sides of the motor gear box (second photo with new motor). The slide-out that was stuck open is also shown below.
Is there a manual override on Lippert slide out?
All Lippert electric slide-out units come with a manual override system. Please watch this video in its entirety before you attempt to manually operate your slide-out system.
Why does my slide not retract after new motor?
After the new motor was installed, the slide still would not retract. The “square rods” connected to the motor were detached to assure the new motor was functioning. We found that power to the motor existed only when the “out” part of the slide’s in/out button was pushed. There was no power to the motor when the “in” side of the button was pushed.
What can I use to retract a Lippert slideout?
The Lippert Hydro-Sync Slideout Systemcan be run with auxiliary power devices like electric drills, ratchet wrenches or cordless screwdrivers. In the event of electrical or system failure, this manual method of extending and retracting the slideout room can be used. A standard handheld drill is all that is required.
Is the Lippert slide out controller a problem?
A final update for my slide-out problem. The good folks at RV Masters in Houston diagnosed the problem to be a “bad” Lippert Slide-Out Controller. The “in/out” switch and relay all work fine and were not the problem. A new controller was installed and the slide out is working great again!
What are the components of the Lippert slideout system?
TROUBLESHOOTING The Lippert Electric Slideout System is only one of four interrelated slideout room system components. These four components are: chassis, room, coach, and Lippert Electric Slideout System. Each one needs to function correctly with the others or misalignment problems will occur.
What causes a slide out to not retract?
With that being said, the biggest issue with slide-outs doesn’t have anything to do with the extension/retraction process. It has to do with seals, the rubber gaskets that surround a slide-out and keep the elements at bay. Improperly installed seals can pull loose and affect movement of the slide.
How to troubleshoot the Lippert electric slideout system?
TROUBLESHOOTING The Lippert Electric Slideout Systemis only one of four interrelated slideout room system components. These four components are: chassis, room, coach, and Lippert Electric Slideout System. Each one needs to function correctly with the others or misalignment problems will occur.
What is the disclaimer on the Forest River?
DISCLAIMER OF CONSEQUENTIAL AND INCIDENTAL DAMAGES:THE ORIGINAL CONSUMER PURCHASER OF THIS RECREATIONAL VEHICLE AND ANY PERSON TO WHOM THIS UNIT IS TRANSFERRED, AND ANY PERSON WHO IS INTENDED OR UNINTENDED USER OR BENEFICIARY OF THIS UNIT SHALL NOT BE ENTITLED TO RECOVER FROM WARRANTOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES.
Is there a warranty on a forest river recreational vehicle?
Your recreational vehicle was built using the high standards set by Forest River Inc. and following the strict guidelines set forth by the Recreational Vehicle Industry Association, (RVIA), as well as complying with the requirements of all applicable state and federal agencies. Please carefully read the Limited Warranty in the front of this manual.
Where do I find the owner’s manual for Forest River?
To Ensure Trouble -free Waste Water Operation Page 65 Toilet Page 66 Water System Maintenance and Troubleshooting Page 67 Page 5 Revised December 2012 Table of Contents Section 6 Appliances Appliances Page 68 Cooktop Page 68 To Prevent Fire or Smoke Damage (Cooktop)
TROUBLESHOOTING The Lippert Electric Slideout Systemis only one of four interrelated slideout room system components. These four components are: chassis, room, coach, and Lippert Electric Slideout System. Each one needs to function correctly with the others or misalignment problems will occur.
How to start a forest river waste water system?
Page 59 Water System Winterization Page 60-62 Winterizing with Compressed Air Page 60 Winterizing with RV Approved Antifreeze Only Page 61-62 De-Winterizing your Aviator Page 62 Waste Water System Page 63 Black Tank Flush Inlet Page 63 Holding Tanks Page 64 To Empty the Holding Tanks Page 65 To Ensure Trouble -free Waste Water Operation
Are there any problems with the slide out on an RV?
Troubleshooting RV Slide Out Problems: One main problem with slide outs is that they may get out of alignment. The good news here is that each slide can be adjusted separately. All you have to do to fix it is take your RV to a dealer and let them make an adjustment.
Do you need to know slide out mechanism for RV?
We don’t recommend buying or avoiding an RV because of the slide-out mechanism. Buy the RV that works for you and spend some time learning how the slide-out works. You don’t need to be an authority to understand the gist of the system; just know enough to perform visual inspections and a little light maintenance.
Can a bulldozer slide out of the dirt?
If you’ve ever marveled at the ability of a bulldozer to easily pick up thousands of pounds of dirt, you’ve witnessed hydraulics at work. This massively robust approach makes light work of slide-out movement, which (theoretically, at least) leads to long life and relatively few problems.
Is there a replacement motor for a disco slideout?
All disco owners are in sympathy with you and would all say the replacement motor is worth the $. On the Disco, the driver side slide fits flush to the floor when extended. The three men are getting it over the ramp to retract. There is a replacement motor with higher torque available.
What is Service Bulletin sba0267 for Fleetwood?
If you have an Electric Slideout Fleetwood has a service bulletin SBA0267 that explains the lift kit. I have a Monaco Camelot which has a balky roadside bedroom slide. I discovered that the gasket underneath was binding–it had come loose at a corner and was folded under the slide floor.
How do you remove the slide out on a Fleetwood RV?
The process of removing the slide-out is nearly the same in both mechanical and hydraulic systems, it involves: Switching on the slide-out room control. Put the slide-out into position.
Why is my slide out on my Fleetwood not working?
Hydraulic systems fail because of the following problems. The valves that close and open to let the hydraulic fluid to pass at desired locations may be defective. There is no need for immediate alarm if your slide won’t open using the normal procedure, do, taking utmost care as dealing with a faulty slide can be disastrous sometimes fatal.
Are there any problems with a Fleetwood RV?
Does Fleetwood RV come with slide out problems? Yes, it does – just like every other ‘ Class A RV’ manufacturer including Coachman, Forest River, Liberty Coach, Jayco, etc. One of the best ways to permanently fix this problem is to use Solera Family Room. Check it on Amazon.
What to do when slide outs don’t move?
Make sure the house batteries are charged completely, or if at all possible, plug your RV into shore power. This will indicate whether the problem may be the batteries or not. If you push the button for the slide outs and can hear the motor running but the slides don’t move, check the motor’s shear pins.
What happens if you push the slide out button?
If you push your slide-out button and nothing happens, double check to make sure that the path of the slide out is unobstructed. A stray item wedged in your slide out can be an easy fix, so go check before tearing your motorhome apart looking for the slide motor.
Why is my RV slide not going all the way out?
RV Slide will Not Go all the Way Out Most RV problems can be solved by looking for simple obstacles or obstructions first. If this problem is happening to your kitchen slide out then you may have some plumbing lines or other kitchen equipment in the way.
What to do if your slide out gets stuck?
If your slide out gets stuck and has problems extending or retracting, there are some straightforward ways to determine the problem. First make sure the slide out isn’t locked in position, then determine if there is a power supply problem.
If you push your slide-out button and nothing happens, double check to make sure that the path of the slide out is unobstructed. A stray item wedged in your slide out can be an easy fix, so go check before tearing your motorhome apart looking for the slide motor.
Why is my slide out pump not working?
Damaged valves are another common cause for pump failure. Hydraulic systems are typically found with larger slides. Being familiar with the type of slide out system you have helps in not only determining the issue, but also in choosing the correct repair parts.
Are there any problems with a slide out system?
They are easy to operate but also carry their share of problems when they’re not properly maintained. Some of the problems associated with mechanical slide-out systems include: Obstruction by solid materials for example pieces of clothes, beer cans, umbrellas, shoes, and other items Rust on the parts.
Can a driver side slide be retracted on a disco?
If neither of these are possible they say the slides should be moved only with fully charged batteries. On the Disco, the driver side slide fits flush to the floor when extended. The three men are getting it over the ramp to retract. There is a replacement motor with higher torque available.
After the new motor was installed, the slide still would not retract. The “square rods” connected to the motor were detached to assure the new motor was functioning. We found that power to the motor existed only when the “out” part of the slide’s in/out button was pushed. There was no power to the motor when the “in” side of the button was pushed.
Why is my slide out not working in my RV?
Let’s start with the simple and easy to test causes before moving onto the more complicated items Whether hydraulic or electric, your slide out compartment will require power from the RV battery. If pressing the switch doesn’t trigger any sound or movement, the electrical system will be the right place to start testing.
Why does my forest river slide not retract?
Storiing fishing poles from the other side, the metal ends of the pole shorted the P/C board. As always, this will happen when the slide is extended. Ditto for Forest River’s RVs. Level first, extend slides afterward.
When is the next Forest River RV Show?
July 17-19, 2020 Chenango… RV Industry News, Recalls, and Service Bulletins. Press information, industry announcements, RV shows, RV industry current affairs, Forest River related recalls and service bulletins. Recall- 2019-20 Salem,… List your rig or lightly used gear for sale. Our classifieds are FREE and available to all members.
Who is responsible for the Forest River forums?
Forest River Forums.com is not responsible for the factual or legal accuracy of any of the statements posted in the Dealer and Product Review section. Post about your personal experience, help other RVer’s find great dealers.
Why do I have trouble retracting my slideout?
I don’t know a lot of the details, but it turned out that at the end of the stroke, the slide out dropped so that one of the rack and pinion sets changed center distance enough that the gear teeth disengaged. The retracting load would then fall on only one set of gears thus causing the slideout to skew and bind.
All disco owners are in sympathy with you and would all say the replacement motor is worth the $. On the Disco, the driver side slide fits flush to the floor when extended. The three men are getting it over the ramp to retract. There is a replacement motor with higher torque available.
I don’t know a lot of the details, but it turned out that at the end of the stroke, the slide out dropped so that one of the rack and pinion sets changed center distance enough that the gear teeth disengaged. The retracting load would then fall on only one set of gears thus causing the slideout to skew and bind.
Where is the slide out controller on a motorhome?
For my motorhome, there are two slide out controllers attached to the “roof” of the middle basement compartment between the two main beams of the frame. One controller for the passenger side slide-out and one for the drive side slide-out. RV Masters charged $130 for the new controller and $140 for an hour of labor to install the controller.
Then, always have the coach level and the engine running before moving slides. The slides on some rigs (like Forest River) will not operate with the ignition or engine running. Safety issue. Other rigs are different. A friend in our chapter had this same problem that he fought for several years.
How to troubleshoot a Lippert slide out in an RV?
To help you figure out next steps after you determine the problem lies in the hydraulic system, RV expert Dave Solberg walks you through a quick inspection of the underside of the slide room.
Make sure the house batteries are charged completely, or if at all possible, plug your RV into shore power. This will indicate whether the problem may be the batteries or not. If you push the button for the slide outs and can hear the motor running but the slides don’t move, check the motor’s shear pins.
When do you move the slide on a coach?
Our manufacturer suggests that we move the slides when the coach is plugged into shore power or with the generator running. If neither of these are possible they say the slides should be moved only with fully charged batteries. On the Disco, the driver side slide fits flush to the floor when extended.
What kind of tour is a Fleetwood RV?
Bounder 2022 Fortis 2022 Flair 2022 Gas IROK 2022 Discovery LXE 2021 Discovery LXE 2021 Anniversary Edition
If you have an Electric Slideout Fleetwood has a service bulletin SBA0267 that explains the lift kit. I have a Monaco Camelot which has a balky roadside bedroom slide. I discovered that the gasket underneath was binding–it had come loose at a corner and was folded under the slide floor.
Where can I buy parts for my Fleetwood RV?
A knowledgeable team that can help you troubleshoot repairs and find exactly what you need. Genuine, factory-certified, manufacturer-engineered parts that are built to perform. An online superstore that makes it easy to search and find what you need in just a few clicks.
Are there any problems with the Keystone Montana?
We finally received it and have had nothing but problems every since. 2 service calls for the AC units, Propane regulator had to be replaced, Black water valve had to be replaced, Front door doesn’t shut right, hinges are bent, Kitchen sink faucet leaks from handle, Fire place doesn’t shut off, Toilet doesn’t shut off and floods.
How big is the Keystone Montana 4 slide RV?
This 37 foot, 4 slide, 4 season RV has been everything we hoped for and more. One of the other definite bonuses has been the installation of the washer/dryer combo; allows us to be completely independant and do laundry while watching TV, puzzling,cooking, or in the resorts hot tub!
Are there any problems with a slide out RV?
While RV slide-outs provide additional living space, they also come with their own share of mechanical issues and maintenance tasks. Slide outs can be prone to motor failure, misalignment, and leaks, just to name a few.
Are there any problems with the Lippert slide out?
Further information and manuals for various Lippert Components systems and parts are available, including those for In-Wall, Flush Floor, and Above Floor slide outs. As previously stated, leaks are a common problem with RV slide outs.
Is it OK to operate drivers side slide?
My owner`s manual states that you should NOT operate the slides until the motor home is level to avoid binding and other damage to the slides. Also, I found out the hard way that the drivers side slide has a motor control board that is riveted upside down in the motor compartment.
Where can I get a Fleetwood motorhome slideout system?
Fleetwood Motorhome Slideout Systems Operations Manual 2 7 E. 7th St. Mishawaka, IN 46544 800-334-47 2 Fax 574-256-6743 Contents Introduction System Description Operating the Slideout System 2 Overriding the Slideout System 2 Troubleshooting (Electric Wiring) 3 Preventative Maintenance 4 Power Gear Limited Warranty 4 Fleetwoood
What happens when your slide out won’t slide out?
A stubborn slide-out, though, can turn your trip in to a disaster. Either you spend your days climbing over furniture in an attempt to live in an RV with the walls pushed in or you can’t depart for home with a slide-out that refuses to retract for road travel.
What do you need to know about power gear slideout?
The Power Gear electric slide out system in your unit is designed to give you years of trouble-free operation and reflects the latest state of the art technology. Read, study, and understand this manual before operating this Slideout System. System Description The Power Gear Slideout System consists of four major components:
Why is my drivers side slide out on my Bounder 35R?
I just bought a 2004 Bounder 35R. When I got it the drivers side slide went out and wouldn’t go back in. The dealer said a “shear pin” was broken and the other one was coming loose. They replaced both and lubricated the slide.
What should I do if my slideout is not aligned?
Extend and retract the slide a few times and check for proper room flange sealing. If the room is not properly aligned, repeat steps 1 thru 6. *Depending on the size of your slide, you may need help moving the room by hand.
How do you move a slide out rail?
*Depending on the size of your slide, you may need help moving the room by hand. Tip: To move idler rail once the gear is disengaged, lift the room from the outside or push that side of the room out from the inside. Print these slide-out rail timing adjustment instructions.
Do you need two people to turn a car slide?
If there are two motors on the slide it will require two people and the wrenches need to be turne simultaneously (slide ends within 1 to 2 inches of each other) so do the wrench turns together. The lock switches can bump open just traveling down some of our super highways.
For my motorhome, there are two slide out controllers attached to the “roof” of the middle basement compartment between the two main beams of the frame. One controller for the passenger side slide-out and one for the drive side slide-out. RV Masters charged $130 for the new controller and $140 for an hour of labor to install the controller.
Why is my passenger side slide not retracting?
My trip to Baton Rouge for LSU football this past weekend went to heck when my passenger side slide would not retract (we stayed Thursday night in Lake Charles, LA to visit my son’s family). After calling a couple of Lake Charles RV repair shops, the initial thought was the slide motor had quit working.
Why is my slide out not working on my car?
To get back home to Katy, the power supply wires to the motor were “reversed” so the slide could be retracted so I could drive home to Katy, TX. With the power supply wires “reversed”, the slide will now not extend.
Where is the over ride on a Lippert slideout?
The Lippert Electric slide comes with a manual over ride system. Locate the crank extension with pin outside of the chassis main rail as, Fig. 2, page 7, shows underneath the unit on the end of the motor (If your crank extension is under the inside of the frame, please refer to page 8).
How to manually retract an RV slideout in its extended?
Gary Bunzer, the RV Doctor, explains how to manually retract an RV slideout that is stuck in its “out” position. Upload, livestream, and create your own videos, all in HD.
What are the common problems with fifth wheel slide outs?
Each slide-out operating system has its own unique problems. Check out the following common problems with slide-outs on a fifth wheel. A faulty motor or gearbox could be the problem if your RV slide-out gear system is motor-driven. In such cases, if the motor is faulty or breaks down, then the mechanism will not work.
Can a Damon intruder slideout be torqued?
This sets the coach “true” so the slides are not “torqued”, which can cause binding and damage. I own a 2003 Damon Intruder. My owner`s manual states that you should NOT operate the slides until the motor home is level to avoid binding and other damage to the slides.
If you’ve ever marveled at the ability of a bulldozer to easily pick up thousands of pounds of dirt, you’ve witnessed hydraulics at work. This massively robust approach makes light work of slide-out movement, which (theoretically, at least) leads to long life and relatively few problems.
Troubleshooting RV Slide Out Problems: One main problem with slide outs is that they may get out of alignment. The good news here is that each slide can be adjusted separately. All you have to do to fix it is take your RV to a dealer and let them make an adjustment.
Are there any problems with the slide out?
Most slide out problems are not that difficult to trace and then solve. There will be those that require the help of a professional technician to repair. The key would be to get to know your system and learn when the task is beyond your abilities to handle .
My owner`s manual states that you should NOT operate the slides until the motor home is level to avoid binding and other damage to the slides. Also, I found out the hard way that the drivers side slide has a motor control board that is riveted upside down in the motor compartment.
What happens when you push the slide out button on an RV?
If your RV or motorhome doesn’t have the juice, your slide outs aren’t going to budge! If you push your slide-out button and nothing happens, double check to make sure that the path of the slide out is unobstructed.
